The store MAILLOT-ERABLE - The Japanese Maple specialist

Search result

Keywords researched : height

Rotating working table GREEN T Plus ref : 9749 Diameter of the table: 580 mm, thickness: 20 mm. Made in Italy, this beautifully finished plywood and metal table is for bonsai enthusiasts of every level. The foot pedal, operated by a hydraulic jack, allows the height to be adjusted between 475 and 820 mm. It can bear a 200 kilo weight at low position and 40 kilos in maximum height . Directional feet offer better stability while you work on the smallest to the biggest bonsai. The rotating table can be blocked by pressing the handle. Five hooks allow the bonsai pot to be fixed to the table. Sold without bonsai nor bungee cords. This portable table weighs 15 kilos and can be carried by its handle. 465,00^€ order

sequoiadendron giganteum vida magical mistery ref : 11755 This variety is still rare on the market and is a lemon yellow improvement of the standard variety. It has a straight trunk and a very thick bark, cracked and clear brown colored. The main branches take a plunging slanting direction, giving its crown a very regular conical form. The leaves are like scales, spear-shaped, and their dimensions vary between 2 and 4 cm. The evergreen leaves present lemon yellow tones with glaucous reflections and red/brown colored cones. This resinous tree is quite resistant to cold in the tempered climate of France, Belgium, and Swiss. It likes light, the best is full sun exposure, or at least 6 hours a day of direct sunlight and a good atmospheric moist. It is sensitive to wind. It barely vegetates in the very hard soils. It is hard to multiply. Indeed, the "carrot" form of the Sequoiadendron roots system makes the transplantation of this tree quite difficult. The best is to plant it when it is very young. Its red/brown trunk stands out in any landscape. Adult height: about 300-350 cm. Adult width : 60-90 cm. Medium rate growth (30/40 cm per year). The giant sequoia grows in acid, clay, moist, sandy, and well-drained soils. This variety grows in a pyramidal form when it is young, and then takes a more columnar form over the years. Delivered in a 5-liter pot. Diameter : 22 cm. Approximate height of the plant on delivery: 80-100 cm. On a side note : the sequoiadendron giganteum lives in wildlife in California on the pccodental Sierra nevada valleys until 2000 meters of altitude. It reaches, in its country, 100 meter in height. In our countries, there only are about 60 meters hight subjects. One of the pictures shows you an adult subject at the nursery of the nurseryman who obtained this variety. 48,00^€ order

Set of 3 air layering baby rooter pots ® ref : 6587 Set of 3. Height 100 mm, Ø 80 mm. For trunks of 7-15 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 7,80^€ order

Set of 3 air layering big rooter pots ® ref : 6590 Set of 3. Height 150 mm, Ø 120 mm. For trunks of 15-25 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 10,80^€ order

Set of 5 air layering big rooter pots ® ref : 6591 Set of 5. Height 150 mm, Ø 120 mm. For trunks of 15-25 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 17,00^€ order

Set of 5 pots air layering baby rooter pots ® ref : 6589 Set of 5. Height 100 mm, Ø 80 mm. For trunks of 7-15 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 13,00^€ order

Set of sphagnum and 3 air layering rooter pots ® ref : 473 Set of 3 pieces with one bag of sphagnum peat moss. Height 100 mm, Ø 80 mm. For trunks of 7-15 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 11,80^€ order

Set of sphagnum and 5 air layering baby rooter pot ref : 482 Set of 5 pieces with one bag of sphagnum peat moss. Height 100 mm, Ø 80 mm. For trunks of 7-15 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 17,80^€ order

Stone lantern 150 cm ref : 9368 Height 150 cm. Width of the top section 50*50 cm. Weight 220 kilograms delivered in 5 pieces to be easily assembled at home. Solid granite lantern with round windows and a column, decorated with a graphic symbol, implanted in the ground. It's possible to add a lamp in this lantern. 540,00^€ order

Stone lantern 200 cm ref : 4750 Lantern of Japanese garden made of real granite, height 200 cm. Width 70 centimeters. Weight 800 kilograms in 5 elements. Model pierced capable to receive a bulb to illuminate it. For European country possible expedition only on estimate. Contact us. 1.360,00^€ order

Stone lantern 250 cm ref : 12009 Elevate your garden to a whole new level with our majestic Authentic Japanese Granite Garden Lantern. Impressive and elegant, this exceptional piece stands at a height of 250 cm, creating a captivating focal point for your outdoor space. Every detail of this lantern has been meticulously crafted to bring a touch of traditional Japanese art to your garden. Made up of six remarkable elements, weighing a total of 2500 kilograms, this lantern embodies quality and durability. We even offer the possibility to ship it to Europe, providing a custom quote for you. Imagine the visual impact of this lantern in your garden. The imposing 250 cm height is complemented by a sturdy and elegant base. Each element contributes to the unique aesthetics of this lantern: the top of the cap, with dimensions of 17 cm in height and a diameter of 40 cm, adds a touch of delicacy. The cap itself, measuring 30 cm in height and with a diameter of 150 cm, creates a majestic dome. The cage, with a height of 40 cm and a diameter of 55 cm, captures the essence of Japanese architecture. The tray supporting the cage, at 30 cm in height and a diameter of 85 cm, combines functionality and beauty. The column, imposing with its 95 cm in height and diameter of 50 cm, evokes the natural elegance of granite. The pedestal, measuring 130 cm by 140 cm and 35 cm in height, offers unparalleled stability. What sets this lantern apart is its rare style, even in Japan. It's inspired by the splendor of the Japanese garden at KENROKU-En in KANAZAWA, as evidenced by the last photo in situ. Each element has been meticulously shaped from an ancient book of Japanese garden architecture, ensuring exceptional authenticity. We proudly acknowledge the evolution of our garden elements, exposed to the outdoor elements. The natural development of patina, moss, and lichen lends each piece an antique aura and precious authenticity, qualities highly prized in the art of traditional Japanese gardening. Immerse yourself in the very essence of Japan with our authentic Japanese granite garden lantern. Transform your outdoor space into a haven of serenity and timeless elegance. Contact us today to discuss bringing this masterpiece to life in the heart of your European garden. 5.280,00^€ order

Stone lantern 250 cm ref : 7433 Lantern of Japanese garden made of real granite, height 250 cm. Width 80 centimeters. Weight 1000 kilograms in 5 elements. Model pierced capable to receive a bulb to illuminate it. Possible expedition on estimate. Contact us.. 2.350,00^€ order

Stone lantern 300 cm ref : 7435 Lantern of Japanese garden made of real granite, height 300 cm. Width 90 centimeters. Weight 14000 kilograms in 5 elements.it.Possible expedition on estimate. Contact us. 3.690,00^€ order

Stone lantern 50 cm ref : 5931 Height +- 50 cm. Width 45 cm. Weight 80 kilograms delivered in 5 elements to be easily assembled at home. This solid granite lantern boasts an organic form, a stone grid at the window and a lotus bud crown. The beauty of natural stone is that it weathers with time, adopting moss and lichen, like the lanterns seen in long-established temple gardens. 275,00^€ order

Stone lantern granit and wood part ref : 6716 Lantern of Japanese garden made of real granite, height 160 cm. Weight + - 100 kilograms in 3 elements. Composed of a foot made of granite of section 16*16 cm, surmounted of a tray of 34*34 cm on which is placed the part, trifles in wood collected by collage of: 53*50*42 cm. The windows are in translucent synthetic matter. The whole foot is pierced of part in part to be able to make pass an electric wire. On the face before the foot of the ideograms are encrusted. This modéle is has plant or seal. 825,00^€ order

Stone lantern granit ORIBE 120 cm ref : 4746 Lantern of Japanese garden made of real granite, height 120 cm. Width of the hat 42*42 centimeters. Weight 180 kilograms in 5 elements. Model pierced capable to receive a bulb to illuminate it. 420,00^€ order

stone lantern kanshuji 120 cm ref : 7430 Height 120 cm. Width of the top section +- 90*75 cm, weight approximately 365 kilograms, delivered in 7 elements. A Japanese lantern of neat proportions made of solid granite and featuring a wide wooden screen window. A lamp can be added to this model to light the garden by night. 1.260,00^€ order

stone lantern kotoji 180 cm ref : 7432 Height 180 cm. Width of the top section 80 cm, weight approximately 435 kilograms delivered in 8 pieces to be easily assembled at home. This granite lantern style called kotoji is a copy of one that has become a symbol of the Kenrokuen garden in Japan. The shape of the legs is like a Japanese koto (harp) and one leg has a base that acts as a counterweight to balance the lantern. In Kenrokuen garden this impressive lantern is placed next to the shore of a pond in the water and floodlit at night ? an idea you might like to emulate in your garden. A lamp can also be fitted to this lantern. 1.510,00^€ order

Stone lantern Tachi Gata 150 cm ref : 7434 Height 150 cm. Ø width 55 cm, weight 300 kilograms delivered in 5 elements to be easily assembled at home. Showing the stone carver's skills, this granite lantern is decorated with a deer, flowers, latticework, waves and lotus leaves. It's an ode to nature. The resplendent roof has an onion dome top and roof tips shaped like the curl of a fern. A lamp can be added to this model to illuminate the garden on balmy summer nights. For Europe delivery please contact us before ordering to estimate the transport cost. 960,00^€ order

Stone lantern TACHI GATA h 100 cm ref : 4744 Height 100 cm. Weight 100 kilograms, delivered in 6 pieces to be easily assembled at home. Showing the stone carver's skills, this granite lantern is decorated with a deer, flowers, latticework, waves and lotus leaves. It's an ode to nature. The resplendent roof has an onion dome top and roof tips shaped like the curl of a fern. A lamp can be added to this model to illuminate the garden on balmy summer nights. 560,00^€ order