The store MAILLOT-ERABLE - The Japanese Maple specialist

Search result

Keywords researched : copper

Fertilizer for bonsai and acer Basacote plus 800 g ref : 10063 Basacote© High K 6M 13.5.18 plantation fertilizer. It contains trace elements, MgO(2) and SO3(12). Slow difusion pellets, active for 6 months. Trees and shrubs, bonsaï, perrenials, foliage and flower plants. The plantation fertilizer, based of Basacote©, is a complete fertilizer (Boron, copper, iron, manganese, molybdenum, zinc). Fertilizer poor in chlorine with a coating that guarantees a 6 months activity. This fertilizer was only accessible to professionals for a long time but everyone can use it now. Basacote© is used by nursery men and incorporated in substrates by compost makers. Basacote© plantation fertilizer can be used : in spring or in fall during the plantation of ornamentation trees, fruit trees, grapevine, shrubs, perrenials plants and bonsaï. It can also be used as maintenance manure : at the base of the trees and the shrubs, all along the year and after plantation. How to use the product for plantation : put on the ground or bury a tabs for 2 litres of soil or 5 tabs for a pot of 50 cm and then cover it with a little of soil (+/- 1 cm). Do not put the product in direct contact with naked roots. In case of renewing the surface layer, after application hallow the soil to bury briefly the pellets. Before repoting : mix 2 to 4 pellets in a bucket for 4 to 5 litres of compost. A bucket of Basacote© can fertilize 200 litres of soil. A Basacote© bucket contains about 800 grams. A regular use of Basacote© will help you to avoid a lot of maintenance and cultivation problems by helping a vigorous plant to better resist to many exterior attacks. 13,50^€ order

Filter for 2-litre watering can 90*50 mm. ref : 8224 Length: 90 mm. Width: 50 mm. Copper thread grid to fit our 2-litre Japanese watering can and filter out impurities. 24,00^€ order

Filter for 4-litre watering can 136*72 mm ref : 6581 Length: 136 mm. Width: 72 mm. Copper thread grid to fit our 4-litre Japanese watering can and filter out impurities. 32,00^€ order

graines d'acer matsumurae kaga kujaku ref : 10583 Leaves: coppery green, dark green in summer and yellow or reddish orange in autumn. In summer, the young shoots are pinkish red. Bag of about 60 seeds. Harvested on november 2023. 6,00^€ order

Juniperus chinensis itoigawa 02070185 ref : 11820 Height of the tree without its pot : 360 mm. Width of the branches : 570 mm. Non-enamelled pottery of : 433 x 208 x 72 mm. 6-trunks netsuranari style. Juniper with a graceful silhouette, formed by master Chiaru in the Tokyo's region. Itoigawa species with its thin well-colored green scales, particularly vigorous and perfectly adapted to the bonsaï cultivation. Unlike Juniperus chinensis type, it loses only little foliage at the beginning of summer. This tree is composed of a formed bark because it is aged of more than 20 years old. Not any strong wire injury nor cutting wound, currently ligatured with copper wire. Admire its sinuous trunks and their movements. Shelf non-included. Photographed in nvember 2022. 1.100,00^€ order

Juniperus chinensis itoigawa 080902314 ref : 12045 Tree height: 440 mm. Branch width: 385 mm. Unglazed pot dimensions: 340*185*55 mm. Style: Moyogi, from the nursery of Mr. Shiraichi. Well-branched subject with graceful branch trays. Superb trunk movement with its natural shari. Genuine bonsai with original jin and shari, not to be confused with Tanuki. Reformed in February 2020 by Mr. Tomoya Nishikawa through structural cutting and copper wire ligature. Admire the strong trunk with a diameter of approximately 40 mm and its unique curvature. Whitening with jin product on the slightly tinted deadwood with charcoal will give it an ashy color, which is very appealing. The Itoigawa variety with fine green scales, particularly vigorous, and perfectly suited for bonsai cultivation, loses very little foliage in early summer compared to Juniperus chinensis. Requires generous watering in the summer and regular fertilization throughout the growing season. Genuine bonsai aged over 20-25 years. Photographed in September 2023. 1.480,00^€ order

Noozle for watering inox can 4/6 liter Ø 35 mm ref : 7239 For watering-can 4 and 6 liters made of steel. Dimension of the throw 35 mm. Diameter interior mouth: 14 millimeters. Outside 16 mm. Body steel and grid made of yellow copper. Very thin throw. "The technique of the laser permits a regularity and a precision of drilling that give to this new nozzle a throw and a sweetness of watering more adapted to the bonsaïs ". 25,00^€ order

Noozle for watering inox can 4/6 liter Ø 50 mm ref : 10101 For watering-can 4 and 6 liters made of steel. Dimension of the throw 50 mm. Diameter interior mouth: 14 millimeters. Outside 16 mm. Body steel and grid made of yellow copper. Very thin throw. "The technique of the laser permits a regularity and a precision of drilling that give to this new nozzle a throw and a sweetness of watering more adapted to the bonsaïs ". 28,00^€ order

Nozzle for 2-litre watering can Ø 30 mm ref : 4350 Made in Japan, this copper nozzle is used by Japanese bonsai experts. It is 25 mm, has an interior diameter of 12/14 mm and matches our Japanese copper 1.8 or 2-litre watering cans. The holes are pierced with a lazer resulting in an even and regular jet of water more appropriate for bonsai. 25,00^€ order

pinus pentaphylla 07011238 ref : 12065 Tree height: 740 mm, branch width: 800 mm. Netsuranari multi-trunk style with 9 trunks. Trunk diameters range from 10 to 30 mm. Base of the trunks ensemble: 240-280 mm. Nebari: 300 mm. High-quality unglazed Japanese pottery: 560*400*80 mm. Yamadori grown from seed over 60/80 years, this pine exhibits excellent trunk conicity, well-formed barks, and numerous plateaus, presenting a splendid natural appearance. The lived-in, aged character will evoke emotions in its owner. The obliquely inclined base of the trunk adds a unique character to this bonsai. This style of pine is relatively rare in collections and will delight a bonsaï lover. Currently ligatured with copper, which should be taken off on March 2024. No significant wire scars or cutting wounds. Selected by Guy Maillot for the beauty and the short length of its slightly bluish needles, a rare trait in seedlings. Completely reformed, cut, and ligatured by Master Hashimoto in Japan in September 2021. Sold without the display stand. Photographed in November 2023. 2.880,00^€ order

pinus pentaphylla ref: 16080232 ref : 12011 Featuring a twin-trunk shakan style, this tree embodies a unique elegance. It reaches a height of 380 mm and spans an impressive branch width of 650 mm. The trunk diameters, measuring between 40 and 50 mm, lend a substantial presence to the subject. The nebari, with a span of 140/150 mm, anchors this tree in a quality handcrafted Yixing Chinese pottery, with dimensions of 260*260*150 mm, displaying an unglazed finish. Originating from a yamadori of over 60/80 years old, this pine boasts admirable trunk conicity and carefully developed bark. On the backside, a discreet and natural shari adorns the trunk, featuring an aged appearance with cracks that add a natural and authentic effect. The diagonally reclined base of the trunks imparts a distinctive character to this bonsai. This style of pine, relatively rare in collections, will captivate the passionate soul of an enlightened enthusiast. An authentic bonsai adorned with original jin and shari, it clearly distinguishes itself from tanuki counterfeits. Currently ligatured with copper wire, requiring special attention by March 2024, this tree presents no major injuries from wires or cutting. The selection of this bonsai is based on its undeniable beauty and the moderately long needles, slightly tinted blue, a rare trait among seedlings. It has won the heart of Guy Maillot, a passionate bonsaï lover. Please note that the stand is not included. Photographs dated August 2023 offer a comprehensive view of this specimen from every angle. 2.430,00^€ order

PINUS PENTAPHYLLA ref: 23030181 ref : 11682 Exceptional tree for collectors! Height of the tree : 630 mm. Width : 730 mm. Artisanal old non-enamelled pot, sand colour : 340*60 mm. 5-trunks kabudachi style : 15 to 40 mm. This tree is more than 70 years old, coming from seedlings with natural small needles. Formed trays and beautiful bark on the base of the trunks of about 170*210 mm. Absolutely requires a full sun exposure. Currently ligatured with copper wire but without any wound. Very good conicity without any strong cutting wound or wire marks. Beautiful roots base. Reformed by master Tomoya Nishikawa in September 2019. Photographed in April 2022. Shelf not included. 2.840,00^€ order

Pinus pentaphylla ref: 25010222 ref : 11615 5-needles pine from Japan, coming from seedlings of more than 40-45 years old. Selected for the beauty of its short and dense needles. Height of the tree only: 950 mm. Width of the branches: 685 mm. Quality non-enameled pot, brown-colored: 470*350*130 mm. Regular nebari of 250-280 mm. Moyogi style. Diameter of the trunk: 170-180 mm. The trunk has a beautiful sinuous aspect and does not have strong cutting wound or wire mark. The bark is completely formed. It was ligatured in December 2020 by the students of Master Katoh in Japan with copper wire and is currently without wires. There are some jins on the branches that will get patina over the years. It comes from Katoh nursery, Japan. Shelf not included. Photographed in January 2022. 1.630,00^€ order

Plastic watering can 3 litres ref : 10333 Length of the spout without its rosette 280 mm. Weight empty 270 grams. Imported from Japan, this light-weight plastic watering can, with rosette, can hold 3 litres. It's highly rated for dispensing liquid fertiliser solutions. Dimensions of the tank : 190*140*140 mm. Diameter of the opening for the spout : 15 mm. Spout : 65*45 mm in plastic and metal for the part that makes the jet. How to assemble it: First make sure that the small white ring is on the base of the spout (BELOW NOT ABOVE the screw-on part), you'll see a groove below the lip where it fits into. This seal will keep the spout watertight. Next you pass the blue ring over the top of the spout and screw it onto the can. (If the white ring is in the wrong place then the spout will leak water but when properly assembled the watering can works perfectly). Interchangeable copper nozzle can also be added to this model. Reference 4350/4351 13,00^€ order

Plastic watering can 3 litres ref : 4344 Length of the spout without its rosette 250 mm. Weight empty 250 grams. Imported from Japan, this light-weight plastic watering can, with rosette, can hold 3 litres. It's highly rated for dispensing liquid fertiliser solutions. How to assemble it: First make sure that the small white ring is on the base of the spout (BELOW NOT ABOVE the screw-on part), you'll see a groove below the lip where it fits into. This seal will keep the spout watertight. Next you pass the blue ring over the top of the spout and screw it onto the can. (If the white ring is in the wrong place then the spout will leak water but when properly assembled the watering can works perfectly). Interchangeable copper nozzle can also be added to this model. Reference 4350 / 4351 13,00^€ order

Plastic watering can 4 litres ref : 10334 Length of the spout without its rosette 300 mm. Weight empty 340 grams. Imported from Japan, this light-weight plastic watering can, with rosette, can hold 4 litres. It's highly rated for dispensing liquid fertiliser solutions. Dimensions of the tank : 210*140*160 mm. Diameter of the opening for the spout : 15 mm. Spout : 80*65, in plastic and metal for the part that makes the jet. How to assemble it: First make sure that the small white ring is on the base of the spout (BELOW NOT ABOVE the screw-on part), you'll see a groove below the lip where it fits into. This seal will keep the spout watertight. Next you pass the blue ring over the top of the spout and screw it onto the can. (If the white ring is in the wrong place then the spout will leak water but when properly assembled the watering can works perfectly). Interchangeable copper nozzle can also be added to this model. Reference 4350/4351 15,50^€ order

Replacement nozzle for 2l watering can Ø 25 mm ref : 4349 2.5 cm long, Ø interior 1.4 cm. If your copper spout becomes clogged or blocked with limescale, buy this replacement slanted-edge nozzle designed to fit a 2-litre watering can. A must for watering bonsai trees and a pleasure to use on all plants. Handmade in Japan, see the photos of how it's made here . Replacement spout for our 2l copper watering can 4338 18,50^€ order

Rosette for a 2 and 4-litre watering can Ø 30 mm ref : 4351 Made in Japan, this copper rosette pours the finest rain out of all our range of interchangeable spouts. It has an inclined 30 mm head and an interior diameter of Ø 14 / 15 mm. It matches our Japanese copper 2 and 4-litre watering cans. The holes are pierced with a lazer resulting in an even and regular jet of water more appropriate for bonsai. 23,00^€ order

Rosette for a 2 and 4-litre watering can Ø 35 mm ref : 8684 Made in Japan, this copper rosette pours the finest rain out of all our range of interchangeable spouts. It has an inclined 30/ 35 mm head and an interior diameter of 12/13 mm. It matches our Japanese copper 2 and 4-litre watering cans. The holes are pierced with a lazer resulting in an even and regular jet of water more appropriate for bonsai. 26,00^€ order

Rosette for a 5 and 6-litre watering can Ø 50 mm ref : 4347 Made in Japan, this copper nozzle is used by Japanese bonsai experts. It has 50 mm head, an interior diameter of 12 mm and matches our Japanese copper 5 and 6-litre watering cans. The holes are pierced with a lazer resulting in an even and regular jet of water more appropriate for bonsai. 28,00^€ order